Cased-Hole Standalone Evaluation Succeeds in the Absence of Openhole Data

Abstract

This article, written by JPT Technology Editor Judy Feder, contains highlights of paper SPE 202894, “Cased Hole Standalone Evaluation: Breaking the Barrier To Successfully Evaluate Challenging Deep Carbonate Reservoirs,” by Pradeep Menon and Carey Mills, ADNOC, and Suvodip Dasgupta, SPE, Schlumberger, et al., prepared for the 2020 Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, held virtually from 9-12 November. The paper has not been peer reviewed. Accurate petrophysical evaluations (formation lithology, porosity, and water saturation) are essential in characterizing potential reservoir zones and estimating resources in place. Typically, these evaluations rely on acquisition of openhole logging measurements; however, this is not always possible. The complete paper outlines two examples from tight gas reservoirs in two separate fields offshore Abu Dhabi in which openhole data could not be acquired and petrophysical analysis was undertaken using cased-hole log data. These evaluations successfully identified gas-saturated porous intervals in each well, one of which was successfully flow-tested. Introduction A growing need exists to increase gas production in the UAE. As a result, specific gas-production targets have been mandated from development of currently undeveloped deep gas carbonate reservoirs such as the Permo-Triassic Khuff formation, the middle Jurassic Araej formation, and the Permian Pre-Khuff Unayzah and Berwarth formations. Recent appraisal wells have aimed at evaluating these reservoirs systematically by acquiring a good suite of openhole logs, cutting conventional cores, and conducting well-testing operations. These well data are combined with an evolving regional understanding to better assess and ultimately develop these complex formations. An accurate petrophysical evaluation requires the petrophysicist to develop a realistic evaluation of formation lithology, porosity, and water saturation. These parameters provide the foundations for further work such as static modeling stands, and they must be robust. The Upper Khuff is composed of dolomite occasionally grading to calcareous dolomite with minor interbeds of claystone and anhydrite. In core and cuttings, the dolomite in the uppermost section exhibits a grainstone texture with poor intercrystalline/intergranular porosity. The Lower Khuff is composed of very hard dolomite in part grading to calcareous dolomite, medium-to-dark grey-brown in places, with occasional very-fine-to-medium grainstone texture and very poor intercrystalline porosity. In this paper, the Upper and Lower Araej members are interpreted to have been deposited in an open, marine- circulation shelfal environment, while the Uweinat member is considered to have been deposited in a more- restricted circulation setting with-in a similar shelfal environment. The Barrier Openhole logging generally is the preference for formation evaluation because it represents the simplest environments and benefits from a comprehensive list of available measurements. The variety of tools and diversity of output data available make openhole log acquisition the gold standard for formation evaluation. However, in certain situations in which openhole logging is not possible because of borehole conditions (re-entry of old cased wells, wellbore instability, over-pressure), no option exists other than acquiring petrophysical data in a cased-hole environment.