Abstract

We developed a direct experimental approach for investigating the correlation between efficiency droop and recombination rate variation under current injection conditions by using time-resolved electroluminescence (EL) technique. We applied this approach to understand the droop phenomenon of GaN-based light-emitting diodes grown on patterned sapphire substrates (LED-on-PAT) and planar sapphire substrates (LED-on-PLA). Because of lower dislocation density and current leakage in LED-on-PAT compared to LED-on-PLA, it was found that the effective carrier density injected into quantum wells (QWs) in LED-on-PAT was higher than that of the LED-on-PLA under the same current injection conditions, based on the analysis of spectral broadening of EL spectra with varying current injection and photoluminescence experiments under resonant and non-resonant excitation conditions. The efficiency droop in LED-on-PAT was found to be much more severe than that of LED-on-PLA, despite the higher overall quantum efficiency of LED-on-PAT. From the time-resolved EL analysis, we could separate radiative and non-radiative recombination contributions and directly observe (i) the decrease and saturation of radiative recombination time and (ii) the increase and following decrease in behavior of non-radiative recombination time with increasing current injection level, showing a strong correlation between efficiency droop and recombination rate variation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call