Carboxylate clays: A model study for polypropylene/clay nanocomposites

Abstract

Sodium-montmorillonite was intercalated by carboxylate salts to prepare carboxylate clays. The intercalation of sodium acetate doubles the clay basal spacing and no degradation of the carboxylate clay is noticed in the extrusion temperature range. These carboxylate clays were used to synthesize polypropylene-graft-maleic anhydride (PP-g-MA)/clay nanocomposites. Nanocomposites were also produced by a one-pot process using in situ prepared carboxylate clay. The carboxylate salts within the clay layers partially neutralize the maleic anhydride groups of the PP-g-MA matrix, in situ during the melt compounding. The ionic groups of the partially neutralized polymer offer favourable interactions with the clay, hence reinforcing the interfacial bond between the polymer and the clay and improving the composite properties. The use of carboxylate clay clearly improves the clay dispersion into the PP-g-MA matrix and improves the nanocomposite’s thermal and rheological properties.