Abstract
The determination of cement and sand content in an aged cement mortar is a challenging problem for civil engineers. Techniques like x‐ray diffraction (XRD), thermogravimetric analysis (TGA) and electrochemical impedance spectroscopy (EIS) are well established, which can give some insight of the hydrated products. The present study is an attempt to use x‐ray photoelectron spectroscopy (XPS) technique for the evaluation of ordinary Portland cement (OPC), sand (aggregate) composition and carbonation study in hardened cement mortar. Carbonation analysis and cement to sand ratio for all mortar compositions has been determined and studied in detail in the present work. The C 1s spectra of cement mortar with ratios 1:1, 1:3 and 1:6 shows carbonate formation on the surface with 21, 40 and 32 atomic percent, respectively. An increase in SiO2 content corresponding to sand is observed for all three mortar mix. The formation of silica gel due to carbonation has not been observed in the mortar samples. The cement to sand ratio for all three mortar mixes is found to be in 20–30 percent error limit due to the heterogeneous nature of the mortar system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.