Abstract
Low-carbon olefins, as important platform molecules, are generally produced by limited fossil energy, resulting in massive carbon emissions and intensive energy consumption inevitably. Therefore, it is necessary to develop clean and sustainable alternatives. With this in mind, three low-carbon olefin production processes using waste CO2 and green H2 were proposed, including the methanol-mediated (Option A) and Fischer-Tropsch synthesis (FTS)-based CO2-to-olefin (CTO) processes. Herein, the FTS-based CTO processes are classified into the direct (Option B) and indirect routes (Option C) without/with the reverse water–gas-shift unit. Meanwhile, rigorous process models were established, and detailed mass and energy balances of three processes were obtained with the aid of the process simulator. Moreover, in order to evaluate the feasibility and compare the differences in process performances of three proposed processes quantitatively, comprehensive techno-econo-environmental assessments of three processes were conducted at the system level. The results indicate that, firstly, from a technical perspective, the FTS-based processes are more competitive than the methanol-mediated process due to their higher energy efficiency (67.93%) and carbon utilization efficiency (84.22%). Secondly, from an economic perspective, the methanol-mediated process has a better economic prospect in the minimum olefin selling price (2527.08 $/tonne C2–C4 olefins). Lastly, from an environmental perspective, the methanol-mediated process is more environmentally friendly owing to its lower CO2-eq emissions (61.13 kg CO2-eq/tonne C2–C4). Moreover, for two FTS-based processes, the direct route is favorable in energy efficiency and minimum olefin selling price, whereas the indirect route is preferable in the carbon utilization efficiency and environmental impacts. Overall, the study provides novel approaches for the production of low-carbon olefins, and is of significant importance for reducing carbon footprint and achieving carbon neutrality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.