Carbon nanotubes in nanostructured films: Potential application as amperometric and potentiometric field‐effect (bio‐)chemical sensors

Abstract

AbstractThe assembly of carbon nanotubes (CNTs) into nanostructured films is attractive for producing functionalized hybrid materials and (bio‐)chemical sensors, but this requires experimental methods that allow for control of molecular architectures. In this study, we exploit the layer‐by‐layer (LbL) technique to obtain two types of sensors incorporating CNTs. In the first, LbL films of alternating layers of multi‐walled carbon nanotubes (MWNTs) dispersed in polyaminoamide (PAMAM) dendrimers and nickel phthalocyanine (NiTsPc) were used in amperometric detection of the neurotransmitter dopamine (DA). The electrochemical properties evaluated with cyclic voltammetry indicated that the incorporation of MWNTs in the PAMAM‐NT/NiTsPc LbL films led to a 3‐fold increase in the peak current, in addition to a decrease of 50 mV in the oxidation potential of DA. The latter allowed detection of DA even in the presence of ascorbic acid (AA), a typical interferent for DA. Another LbL film was obtained with layers of PAMAM and single‐walled carbon nanotubes (SWNTs) employed in field‐effect‐devices using a capacitive electrolyte–insulator–semiconductor structure (EIS). The adsorption of the film components was monitored by measuring the flat‐band voltage shift in capacitance–voltage (C –V) curves, caused by the charges from the components. Constant‐capacitance (ConCap) measurements showed that the EIS‐PAMAM/SWNT film displayed a high pH sensitivity (ca. 54.5 mV/pH), being capable of detecting penicillin G between 10–4 mol L–1 and 10–2 mol L–1, when a layer of penicillinase was adsorbed atop the PAMAM/SWNT film. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)