Abstract
AbstractTo improve the interfacial performance of poly[p‐phenylene benzobisoxazole] (PBO) fiber and epoxy resin, a modified multiwalled carbon nanotubes (MWCNTs‐Ecp) were used to achieve this purpose through grafting onto PBO fiber surface using a gamma ray radiation method. Experimental results indicated that the equilibrium wetting rate and equilibrium adsorption amount of the modified PBO fiber for epoxy resin and acetone were all higher than that of as received PBO fiber. The interfacial shear strength (IFSS) of single fiber composite increased from 31.4 to 77.5 MPa after modification. The fracture models of composites are changed from pure interfacial failure to combination failure of interface and resin interlayer. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.