Carbon nanotube networks as gas sensors for NO 2 detection

Abstract

Networks of different carbon nanotube (CNT) materials were investigated as resistive gas sensors for NO 2 detection. Sensor films were fabricated by airbrushing dispersions of double-walled and multi-walled CNTs (DWNTs and MWNTs, respectively) on alumina substrates. Sensors were characterized by resistance measurements from 25 to 250 °C in air atmosphere in order to find the optimum detection temperature. Our results indicate that CNT networks were sensitive to NO 2 concentrations as low as 0.1 ppm. All tested sensors provided significantly lower response to interfering gases such as H 2, NH 3, toluene and octane. We demonstrate that the measured sensitivity upon exposure to NO 2 strongly depends on the employed CNT material. The highest sensitivity values were obtained at temperatures ranging between 100 and 200 °C. The best sensor performance, in terms of recovery time, was however achieved at 250 °C. Issues related to the gas detection mechanisms, as well as to CNT network thermal stability in detection experiments performed in air at high operation temperatures are also discussed.