Abstract
Different softwood lignin O‐acyl derivatives, i.e., methacrylated, hexanoylated, benzoylated, methoxybenzoylated, and cinnamoylated lignin are synthesized and subjected to melt spinning. In the presence of spinning aids such as vanillin and ethylene glycol dimethacrylate, multifilament melt spinning is accomplished with spinning speeds up to 500 m min−1, which allowed for realizing uniform precursor fibers 17 μm in diameter. Out of all acyl‐derivatives of softwood lignin investigated, cinnamoylated softwood lignin (CL) turned out to be superior in terms of processability. CL‐derived precursor fibers are oxidatively thermostabilized and then carbonized applying carbonization temperatures up to 2200 °C. Carbon fiber structure formation is followed in detail by wide‐angle X‐ray scattering and Raman spectroscopy. An orientation ≤53% and a d 002 spacing of 0.353 nm is achieved. According to small angle X‐ray scattering, carbon fibers have a porosity of ≈38%. CL‐derived carbon fibers are also characterized in terms of mechanical properties. Tensile strengths up to 0.93 GPa (average 0.75 GPa) are obtained and follow Weibull statistics. Elastic moduli are ≤66.5 GPa (average 41.1 GPa). image
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.