Abstract

Background: Metallic implants show dose-modulating effects in radiotherapy and complicate its computed tomography (CT)-based planning. Dose deviations might not only affect the surrounding tissues due to backscattering and inadvertent dose increase but might also compromise the therapeutic effect to the target lesion due to beam attenuation. Later on, follow-up imaging is often obscured by metallic artefacts. Purposes: This study investigates the dosimetric impact of titanium and radiolucent carbon fiber/polyether ether ketone (CF/PEEK) implants during adjuvant radiation therapy in long bones. (1) Does the use of CF/PEEK implants allow for a more homogenous application of radiation? (2) Is the dose delivery to the target volume more efficient when using CF/PEEK implants? (3) Do CF/PEEK implants facilitate CT-based radiation therapy planning? Materials and methods: After CT-based planning, bone models of six ovine femora were irradiated within a water phantom in two immersion depths to simulate different soft-tissue envelopes. Plates and intramedullary nails of both titanium and CF/PEEK were investigated. Radiation dosage and distribution patterns were mapped using dosimetry films. Results: First, the planned implant-related beam attenuation was lower for the CF/PEEK plate (1% vs. 5%) and the CF/PEEK nail (2% vs. 9%) than for corresponding titanium implants. Secondly, the effective decrease of radiation dosage behind the implants was noticeably smaller when using CF/PEEK implants. The radiation dose was not significantly affected by the amount of surrounding soft tissues. A significant imaging artefact reduction was seen in all CF/PEEK models. Conclusion: CF/PEEK implants lead to a more reliable and more effective delivery of radiation dose to an osseous target volume. With regard to radiation therapy, the use of CF/PEEK implants appears to be particularly beneficial for intramedullary nails.

Highlights

  • In orthopedic oncology, a surgical stabilization of the affected bone is often required after thorough assessment of the clinical context and prognostic factors [1]

  • First, the planned implant-related beam attenuation was lower for the carbon fiber/polyether ether ketone (CF/PEEK) plate (1% vs. 5%) and the CF/PEEK nail (2% vs. 9%)

  • A significant imaging artefact reduction was seen in all CF/PEEK models

Read more

Summary

Introduction

A surgical stabilization of the affected bone is often required after thorough assessment of the clinical context and prognostic factors [1]. Metallic implants show a dose-modulating effect in radiotherapy and complicate its CT-based planning [3,4]. Materials 2020, 13, 1754 only affect the surrounding tissue due to backscattering and inadvertent dose increase but might compromise the therapeutic effect to the target lesion due to beam attenuation. Follow-up imaging and the diagnosis of local recurrences is often obscured by metallic artefacts [5] This is why radiolucent implant materials, in particular, for the use in orthopedic tumor patients, are increasingly being recognized [6,7]. Metallic implants show dose-modulating effects in radiotherapy and complicate its computed tomography (CT)-based planning. Purposes: This study investigates the dosimetric impact of titanium and radiolucent carbon fiber/polyether ether ketone (CF/PEEK) implants during adjuvant radiation therapy in long bones. Purposes: This study investigates the dosimetric impact of titanium and radiolucent carbon fiber/polyether ether ketone (CF/PEEK) implants during adjuvant radiation therapy in long bones. (1) Does the use of CF/PEEK implants allow for a more homogenous application of radiation? (2) Is the dose delivery to the target volume more efficient when using

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call