Carbon felt-based bioelectrocatalytic flow-through detectors: Highly sensitive amperometric determination of H 2O 2 based on a direct electrochemistry of covalently modified horseradish peroxidase using cyanuric chloride as a linking agent

Abstract

Horseradish peroxidase (HRP) was chemically modified using cyanuric chloride (CC) as a linking agent onto a carbon felt (CF), which is a microelectrode ensemble of micro carbon fiber (>7 μm, diameter) with a random three-dimensional structure. The resulting HRP-modified CF (HRP-ccCF) exhibited well-defined redox waves based on the HRP heme Fe III/Fe II redox couple at −0.23 V vs. Ag/AgCl (at pH 7.0), while the HRP-adsorbed CF (HRP-CF) showed no apparent redox couple in the same potential range, indicating that the chemical modification of HRP via CC facilitated the direct electron transfer (DET) between HRP and CF. The apparent heterogeneous electron transfer rate constant k s was estimated to be 35 s −1. Cyclic voltammetry and electrochemical impedance spectroscopy revealed that the interfacial properties (i.e., structure, morphology of enzyme-layer) of covalently modified HRP (HRP-ccCF) and physically adsorbed HRP (HRP-CF) are different, resulting in the difference in the electron transfer properties. The HRP-ccCF was successfully used as a working electrode unit in bioelectrocatalytic flow-through detector for highly sensitive amperometric determination of H 2O 2. Under the optimized conditions (i.e., applied potential, 0 V vs. Ag/AgCl; carrier flow rate, 3.25 ml/min; and carrier pH 7.0), the cathodic peak current of H 2O 2 linearly increased up to 3 μM (sensitivity, 1.94 μA/μM; the detection limit, 0.08 μM [S/N = 3]) with sample through-put of ca. 90 samples/h.