Abstract
The aim of this research is to reduce emissions by capturing carbon dioxide in a solution using an absorption method. The absorption capacity, absorption rate, carbon dioxide removal efficiency, and overall mass transfer coefficient of MEA (Monoethanolamin) and alkaline solvents (NaOH, KOH, Mg(OH)2) were investigated using a bubble column gas absorption reactor with counter current flow. The effects of operational parameters such as solvent concentration (0.01, 0.05, and 0.25M) and solvent type were studied. As a result of the study, it was determined that Mg(OH)2 was less effective in capturing CO2 than KOH, NaOH, and MEA. For all solvent types, the total mass transfer coefficient, absorption rate, and CO2 removal efficiency were increased with the increase in the concentration of solvent. The solvent concentration is increased from 0.01 M to 0.25 M to obtain the highest KGa values for MEA, NaOH, and KOH, 3.75 1/min for MEA, 3.70 1/min for NaOH, and 3.93 1/min for KOH.The MEA, NaOH, and KOH absorption rates were maximum at 0.25 M solvent concentrations as 0.19x103 mol/Ls. The maximum CO2 removal efficiencies for MEA, NaOH, and KOH at 0.25 M solvent concentration are greater than 60%. The highest absorption capacity, 0.576 mol CO2/mol MEA, was obtained at a solvent concentration of 0.01M MEA.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
