Carbon black‐filled immiscible polypropylene/epoxy blends

Abstract

AbstractCarbon black‐ (CB) filled immiscible thermoplastic/thermosetting polymer blends consisting of polypropylene (PP) and epoxy resin were reported in this paper. The PP/epoxy/CB blends with varied compositions and different processing sequences were prepared by melt‐mixing method. The CB distribution and the relationship between morphology and electrical properties of the PP/epoxy/CB blends were investigated. Scanning electron microscopy (SEM), optical microscopy, and extraction experimental results showed that in PP/epoxy blends CB particles preferentially localized in the epoxy phase, indicating that CB has a good affinity with epoxy resin. The incorporation of CB changed the spherical particles of the dispersed epoxy phase into elongated structure. With increasing epoxy content, the elongation deformation of epoxy phase became more obvious and eventually the blends developed into cocontinuous structure. When CB was initially blended with PP and followed by the addition of epoxy resin, the partial migration of CB from PP to the epoxy phase was observed. When the PP/epoxy ratio was 40/60, the percolation threshold was reduced to about 4 phr CB, which is half of the percolation threshold of the PP/CB composite. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 461–471, 2006