Abstract
Article describes the method of steel alloying by vanadium with the use of converter vanadium slag. Thermodynamic evaluation of the process of oxides reduction contained in the vanadium slag during the metal processing by vanadium slag in the ladle was performed, which allowed to determine the technological parameters of the process. Assessment of reduction of oxide elements contained in vanadium slag, in particular, vanadium, iron, manganese, was conducted on the residual content of oxides in the slag. On the basis of results of thermodynamics calculations and experiments authors defined that at optimal correlations of reducing agents (carbon and ferrosilicon) successful reduction of vanadium (98 – 99 %) and iron from converter vanadium slag takes place with the limited recovery of titanium and manganese.
Highlights
Article describes the method of steel alloying by vanadium with the use
Thermodynamic evaluation of the process of oxides reduction contained in the vanadium slag during the metal processing
which allowed to determine the technological parameters of the process
Summary
УГЛЕРОДОСИЛИКОТЕРМИЧЕСКОЕ ВОССТАНОВЛЕНИЕ ЭЛЕМЕНТОВ ИЗ ОКСИДОВ КОНВЕРТЕРНОГО ВАНАДИЕВОГО ШЛАКА. Рассмотрен способ легирования стали ванадием с применением конвертерного ванадиевого шлака. Проведена термодинамическая оценка процесса восстановления оксидов, содержащихся в ванадиевом шлаке, при обработке металла ванадиевым шлаком в ковше, которая позволила определить технологические параметры процесса. Оценку процесса восстановления элементов из оксидов, содержащихся в ванадиевом шлаке, в частности ванадия, железа, марганца, проводили по остаточному содержанию их оксидов в шлаке. На основе результатов термодинамических расчетов и экспериментов определили, что при оптимальных соотношениях восстановителей происходит достаточно успешное углеродосиликотермическое восстановление ванадия (98 – 99 %) и железа из конвертерного ванадиевого шлака при ограниченном восстановлении титана и марганца. Ключевые слова: конвертерный ванадиевый шлак, легирование стали, термодинамические расчеты, восстановление
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have