Carbazole-Based branched Poly(Aryl Piperidinium) membranes for Ultra-Stable anion exchange membrane fuel cells

Abstract

In the technological development of anion exchange membrane fuel cells (AEMFCs), it is crucial to prepare anion exchange membranes (AEMs) with high conductivity and excellent dimensional stability. This study successfully developed highly branched poly(aryl piperidinium) AEMs by introducing 4,4′-bis(N-carbazolyl)-1,1′-biphenyl as branched linker unit into the poly(p-terphenyl piperidinium) backbone. With the introduction of the carbazole group, the plane-conjugated structure and non-rotatable properties are fully utilised, which effectively reduces the entanglement between the polymer backbones and increases the free volume of the AEMs, hence facilitates the construction of an efficient ion transport channel. The branched structure effectively reduces the water uptake of the membrane which leads to improved dimensional stability. The optimized QPCBP-TP-7 membrane exhibited high conductivity, reaching up to 151.88 mS cm−1 at 80 °C, along with excellent mechanical strength (TS = 42.51 MPa, EB = 13.32 %, wet state) and dimensional stability (SR of 22.9 % at 80 °C). Surprisingly, this membrane also exhibited favorable antioxidant properties (retaining over 97.28 % weight after 96 h in Fenton's reagent at 80 °C), and alkaline stability (retaining over 86.81 % efficacy after 1500 h in 5 M NaOH solution at 80 °C). In AEMFCs applications, the QPCBP-TP-7 membrane achieved peak power density (PPD) up to 616 mW cm−2 with the current density is 1330 mA cm−2 at 80 °C (H2-O2) and the QPCBP-TP-7 membrane remained stable and hardly degraded when operated at constant current of 0.1 A cm−2 (80 °C) over 100 h.