Canopy slope effect on the performance of the solar chimney power plant

Abstract

ABSTRACTSolar chimney power plants constitute an impressive construction by its size and its output seems low for its dimensions. Although many works have been carried out on the subject, there is still much scientific and technical improvement to be done. In the present work, we consider the modeling of turbulent flow under the effect of natural convection within a solar chimney power plant (SCPP) by performing numerical simulation using the Saturne Code coupled with Syrthes code. The objective of the study is the analysis of the collector cover slope influence on the performance of the SCPP in two cases. In the first case, the storage system considered is composed solely of the ground under the collector. For the second case, the storage system is made, in addition to the ground, of a 10 cm thick tub filled with water, covering the entire surface of the collector. The concept of minimizing the entropy production is also studied with the objective of optimizing the geometric configuration as well as the effect of the collector cover slope on the efficiency of SCPP. The boundary conditions are defined according to the meteorological data for a typical day available on the site of Adrar, Algeria. The results allow us to focus on the storage system influence on the SCPP performance and the duration of its operation after sunset. This leads to the improvement of the global efficiency of the SCPP. Results show the positive impact of the extra storage media use and the configuration which improves the velocity at the chimney entrance.