Can ZrAlN thin films be used as thermistor sensors for temperature assessment?

Abstract

The electrical characteristics and conduction mechanisms of ZrAlN thin films for their potential use as thermistor sensors were assessed. Various compositions of Zr1-xAlxN were synthesized by sputtering and studied up to 200 °C to understand their sensitivity and applicability. Among the compositions studied, the ones with x = 0.34 and x = 0.46 showed the highest sensitivities, reaching values close to 3000 K. However, the thermo-resistive properties exhibited by these compositions limited their utilization above 100 °C. Zr1-xAlxN film compositions with x higher than 0.46 showed amorphous structures and were found to be insulative. Composition with x = 0.26, within the cubic phase, showed the most promising electrical properties regarding temperature sensing in the studied range. XPS analysis of this composition confirmed the presence of Zr-N and Al-N bonds, with a Zr3+ oxidation state, which suggests the availability of a free electron contributing to the electrical conduction. Impedance measurements performed at different temperatures for this composition revealed the dominant role of the grain boundaries in the conduction mechanism, based upon electron hopping between grains, overcoming the energy barrier imposed by the grain boundaries. ZrAlN thin films demonstrate negative temperature coefficient (NTC) thermistor behavior, expanding their applications beyond protective coatings to temperature monitoring.