Abstract

Polyetheretherketone (PEEK) composites are biocompatible materials that may overcome the esthetic and allergic problems of titanium dental implants. However, their potential for osseointegration with a subsequent survival rate is still questionable. The aim of this study was to evaluate the surface roughness and wettability of different surface-treated filled and unfilled PEEK specimens, which may be indicative of the osseointegration behavior and potential use of PEEK as an implant material. Unfilled, ceramic-filled (CFP) and carbon fiber-reinforced (CFRP) PEEK discs were prepared and left untreated or were surface treated with 50 μ, 110 μ, or 250 μ aluminum oxide particles. The roughness average (Ra) value of each disc was evaluated using a contact stylus profilometer. Their contact angles were measured to evaluate their wettability, which was compared among PEEK discs using ANOVA, followed by Bonferroni test for pairwise comparisons ( P ≤ .05). Regarding the surface roughness, a significant difference was found between unfilled and filled PEEK when untreated and bombarded with 50 or 110 microns of aluminum oxide particles. For the contact angle, a significant difference was found only among the untreated PEEK materials. Among the evaluated PEEK materials, CFRP50, CFRP110 and CFP110 showed the most favorable Ra values with good wettability properties, thus being potential substrates for dental implants.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call