Abstract
The measurement of the power injected by the electron cyclotron heating (ECH) system in the DIII-D tokamak is a critical requirement for analysis of experiments, for tuning the gyrotrons for maximum power and efficiency, for tracking long-term operational trends, and for providing a warning of problems with the system. The ECH system at General Atomics consists of six 110-GHz, 1-MW-class gyrotrons. The radio-frequency (rf) power generated by each gyrotron is determined from calorimetry, using the relevant temperature and flow measurements from the cooling circuits of the cavity, matching optics unit, and dummy loads (DLs). The rf pulse length and time dependence are measured using an rf monitor at the first miter bend in the transmission line. The cavity power loading measured directly gives the generated rf power using a previously determined relationship between cavity loading and rf production. The direct measurement of the efficiencies of four of the transmission lines was performed using a high-power DL placed alternately in two positions of each DIII-D waveguide line, at accessible points close to the beginning and the end of each line. Total losses in the transmission lines range from 21.2 to 30.7%. Experimental results are compared to theoretical predictions of the performance of the components and waveguide lines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.