Abstract
Calcium sulfoaluminate (CSA) cements, which represent a CO2-friendly alternative to conventional Portland cements, are produced by blending CSA clinker with gypsum and/or anhydrite. The hydration kinetics and the hydrated phase assemblages of the main hydraulic phase ye’elimite (calcium sulfoaluminate) with calcium sulfate were studied by isothermal conduction calorimetry, thermogravimetric analysis, X-ray diffraction analysis and thermodynamic modelling. Two calcium sulfates with different reactivities (gypsum and anhydrite) were applied. It was found that the pure phase without any calcium sulfate addition exhibits very slow hydration kinetics during the first 10 h. The hydration can be accelerated by the addition of calcium sulfate or (less effective) by increasing the pH of the aqueous phase. The amount of the calcium sulfate determines the ratio between the hydration products ettringite, monosulfate and amorphous aluminium hydroxide. The reactivity of the added calcium sulfate determines the early hydration kinetics. It was found that the more reactive gypsum was better suited to control the hydration behaviour of ye’elimite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
