Calibration of Curie temperatures for LiTaO/sub 3/ single crystals by the LFB ultrasonic material characterization system

Abstract

The line-focus-beam ultrasonic material characterization (LFB-UMC) system is applied to a standardized comparison and evaluation of the Curie temperatures, T/sub C/, exclusively used in evaluating the chemical compositions of commercial LiTaO/sub 3/ crystals by measuring the velocities of Rayleigh-type leaky surface acoustic waves (LSAWs), V/sub LSAW/. We measured V/sub LSAW/ and T/sub C/ (standardized) under the same T/sub C/ measurement conditions for 36/spl deg/Y X-LiTaO/sub 3/ single-crystal wafers produced by four manufacturers and related the results to the T/sub C/ (individual) measured by the individual manufacturers. The relationships between V/sub LSAW/ and T/sub C/ (individual) varied from one company to another, and a single straight line of the proportional relationship between V/sub LSAW/ and T/sub C/ (standardized) was obtained for all wafers regardless of the manufacturer. These experimental results clarify that the problem associated with T/sub C/ measurements lies in the measurement conditions and the absolute accuracy of the measurement instruments. Measurements of the center frequencies of SH-type surface acoustic wave (SAW) filter devices are compared with V/sub LSAW/ measurements. A method of calibrating T/sub C/ using this ultrasonic system is proposed to establish standardized specifications of SAW-device crystal wafers.