Calibration and uncertainty evaluation of single pitch deviation by multiple-measurement technique

Abstract

Gears are key elements of power transmission systems, and the inspection of their pitch deviation is one of the most important tests on gears. The specifications of gears are assessed using gear measuring instruments (GMIs) or coordinate measuring machines (CMMs), and the results of the measurements must be validated under an appropriate traceability system. In the traceability system, calibrated gauges whose measuring uncertainties are estimated are necessary. In the case of pitch deviation measurement, special artefacts or gears manufactured with high dimensional accuracy are used as reference gauges. In this paper, authors propose calibration and uncertainty evaluation methods for the single pitch deviation of gears measured using CMMs. First, the evaluation of single pitch deviation using a multiple-measurement technique and the estimation of its uncertainty based on the analysis of variance are formulated. Second, a technique for reducing the measurement trials based on the symmetry of the measurement is discussed. Finally, the proposed calibration method is validated through experiments.