Calibration and comparison of laser-induced incandescence with cavity ring-down

Abstract

Laser-induced incandescence (LII), a technique that determines relative soot volume fraction, requires calibration to achieve quantitative results. Although not spatially resolved, cavity ring-down (CRD), an absorption-based method, provides an integreated meausre of fv along the line-of-sight. Here, spatially resolved LII signals from soot within a methane/air diffusion flame are calibrated using CRD, which avoids extrapolation required of less sensitive methods in current use. Comparison of CRD with traditional light extinction and path-integrated LII verifies its accuracy for fv determination. Using CRD, quantification of LII for parts per billion (ppb) fv levels is demonstrated. Experimental tests demonstrate the accuracy of CRD for a single laser-pulse to be better than ±5% for measurement of ppb soot volume fraction levels over a 1-cm pathlength. Using calibrated detector characteristics and a predetermined fv level, the absolute LII signal level within a detection bandwidth of 405–415 nm produced by a laser fluence of 0.25 J/cm2 at 1064 nm within a laminar ethylene/air diffusion flame was calculated. This value is 5×105 photons/srnm per ppm of soot, collected over a 10-ns interval centered at the peak of the LII signal. Comparison of LII with CRD reveals that CRD may be used to advantage in applications where spatially resolved information is not necessary and/or achieving high geometric collection efficiency is impractical LII's chief advantages are the spatially resolved fv visualization and geometric versatility.