Abstract
Turbine blades in aviation engines commonly feature a nickel-based superalloy structure integrated with film cooling holes to enhance inlet gas temperature. However, the presence of these film cooling holes often results in frequent occurrences of fracture failures nearby. The direct current potential drop (DCPD) method, renowned for its exceptional crack sensitivity, is frequently utilized for crack length monitoring. This study establishes a FEM model of the film cooling hole plate specimen to determine the optimal probe point location. Subsequently, a mapping relationship is derived to calibrate Johnson’s formula, accounting for the unequal crack lengths at the edges of film cooling holes. It is confirmed that the crack length measured by the DCPD method represents the cumulative crack lengths on both sides of the hole. Fatigue crack propagation experiments are then conducted, with crack length monitored using a microscope. The results affirm the successful application of the calibrated formula to the film cooling hole plate specimen, exhibiting an average error within 0.1 mm.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
