Calculation of Residual Deformations of Granulated Materials from Exposure to Repeated Loads

Abstract

Listen

Translate article

The analysis of the models for calculating residual deformations accumulated by granular materials under the influence of repeated loads is performed. Determined the hereditary nature of the accumulation of deformation of granular materials. This allowed the use of integral calculus for the analytical solution of the problem of the dependence of residual deformation on the number of repeated loads, the value of the main stresses. The solution is obtained in the form of logarithmic and power-law functions that associate the accumulated deformation with the deformation arising from the first load application with the number of applied loads. The deformation from the first load application is represented by the sum of the two components, instantaneous irreversible and viscoplastic. The viscoplastic component of the deformation is a consequence of stress relaxation in a relatively short period of time equal to the duration of the impact of the load. The analysis of experimental data on the triaxial compression of various granular materials is carried out and the parameters obtained for the power and logarithmic functions are determined. The materials studied include: granite, gneissic, granodiorite and diorite crushed stone, sand and gravel and crushed stone and gravel mixtures with a mineral part from various rocks, fortified sands. The possibility of application of the obtained solutions for the calculation displacement of the surface of the pavement layers of granular materials is shown. The tasks of further research are formulated.