Calcium oxide adsorption of gas phase PCDD/Fs and its impact on the adsorption properties of activated carbon

Abstract

Listen

Translate article

Calcium oxide (CaO), utilized in semi-dry/dry desulfurization systems at municipal solid waste incineration (MSWI) plants, demonstrates some capability to remove polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study assessed the gas-phase PCDD/F removal performance of CaO, activated carbon (AC) and CaO-AC mixtures. Alone, CaO achieved removal efficiencies of only 31.9% for mass and 50.8% for I-TEQ concentration. However, CaO-AC mixtures exhibited significantly higher efficiencies, reaching 96.0% and 92.5% for mass and I-TEQ concentrations, respectively, surpassing those of AC alone, which were 74.7% and 58.5%. BET analysis indicated that CaO's limited surface area and pore structure are major constraints on its adsorption performance. Density functional theory (DFT) calculations revealed that the π-π electron donor-acceptor (EDA) interaction enhances the adsorption between AC and PCDD/F, with adsorption energies ranging from −1.02 to −1.24 eV. Additionally, the induced dipole interactions between CaO and PCDD/F contribute to adsorption energies ranging from −1.13 to −1.43 eV. Moreover, with increasing chlorination levels, PCDD/F molecules are more predisposed to accept electron transfers from the surfaces of AC or CaO, thereby facilitating adsorption. The calculation for mixed AC and CaO showed that CaO modifies AC's properties, enhancing its ability to adsorb gas phase PCDD/Fs, with the higher adsorption energy and more electrons transfer, aligning with gas phase PCDD/Fs adsorption experiments. This study provides a comprehensive understanding of how CaO influences the PCDD/F adsorption performance of AC.