Abstract
Corrosion control of copper alloys such as brass is of great interest to researchers and scientists. Clays become materials of choice as corrosion inhibitors and as their reservoir in corrosive environments. The effect of Rhassoul on the corrosion of Cu-36Zn alloy in 3% NaCl solution has been studied. Electrochemical techniques showed that the optimum concentration was 1g/L showing the highest inhibition efficiency (82%). This concentration was evaluated at five different temperatures. In order to determine the influence of purification, this result was compared to that of the homoionic clay labeled Na+-ST and to the pure calcite. Chemical composition of the brass specimen and solutions were done by inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption (AA) respectively. The effectiveness of this clay against the dissolution of Zinc reached 61%. XRD technique demonstrated the homoionization of this clay by shifting the basal spacing d001.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.