Abstract
The Project consists of two reservoirs with a maximum head differential of 1,226 kw pump-turbine units. The upper reservoir is formed by a 210 ft high rock fill dam with a concrete facing with crest 11,202 ft above sea level. The dam at the lower reservoir is a combination earth and rock fill dam 95 ft high with sloping impervious core and upstream blanket. Geologic foundation conditions at each dam are described along with cross sections, elevations and outlines of construction specifications. The service requirements for dams for pumped storage projects are much more severe than most dams because of rapid daily drawdown and refill. The dams were monitored during and following construction. Records of deflection, settlement and seepage measurements are presented. In addition, some of the miscellaneous project features including erosion control, icing, and some of the project problems and solutions are described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.