Abstract
“Buzz-saw” noise is radiated from a turbofan inlet duct when the fan tip speed is supersonic. In a recent article the effect of an acoustic liner on buzz-saw noise has been examined. Spectral measurements in a rigid and an acoustically lined inlet duct have been compared. Also these measurements have been utilized to assess a buzz-saw noise prediction method. The prediction method is based on a one-dimensional nonlinear propagation model. Sound absorption by an acoustic lining can be included in the model. In this article, the buzz-saw noise prediction method is improved by the inclusion in the modelling of the effect of a boundary layer on absorption of sound in a lined duct. Also, modal measurements from a circumferential microphone array have been examined. These show that the principal source of buzz-saw noise is not always the rotor-alone pressure field. Non-rotor-alone scattered tones can be a significant source of buzz-saw noise at low supersonic fan speeds. The numerical simulations, which only predict the rotor-alone tones, have been re-evaluated in light of these new modal measurements.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
