BURYING MACHINE TO POMEGRANATE BUSHES

Abstract

This article describes the structure and operation of the machine, which covers the pomegranate bushes, the width of the enclosure and the depth of immersion in the soil, the transverse distance between them, the angle of installation of the casing lemeks relative to the wall and their angle of entry into the soil. The results of the research are presented below. In this case, the width of the hulls and the depth of immersion in the soil form a pile of soil at the shape and height required to bury the pomegranate bushes, the transverse distance between the hulls does not re-pour the soil overturned by them. Installation and access angles to the soil were determined from the conditions under which they were able to dig the soil without sliding relative to the side, quality rubbing, and low energy consumption. Calculations on the obtained analytical expressions cover the width of the burial bodies at least 45 cm, the depth of immersion not more than 36 cm, the transverse distance between them not less than 1.26 m, showed that the angle should not be less than 60° and the angle of entry into the soil should be in the range of 20-26°.