Bursting failure prediction in tube hydroforming using FLSD

Abstract

In tube hydroforming, circular components are hydrobulged or hydroformed from tubular blanks with internal pressure and simultaneous axial loading. Thus the tube can be fed into the deformation zone during the bulge operation allowing more expansion and less thinning without any defects such as wrinkling, buckling, and bursting. By contrast with the buckling and the wrinkling, the bursting is generally classified as an irrecoverable failure mode. Hence in order to obtain the sound hydroformed products, it is necessary to predict the bursting behavior and to analyze the effects of process parameters on this failure condition in hydroforming processes. In this study, a forming limit stress diagram (FLSD) is constructed by plotting the calculated principal stresses based on the local necking criterion. Using the theoretical FLSD, we carry out the numerical prediction of bursting failure in a hydroforming process, which usually has non-linear strain path. Finite element analyses are carried out to find out the state of stresses during simple hydroforming operation, in which the FLSD is utilized as the forming limit criterion for assessment of the initiation of necking, and influences of the material parameters on the formability are investigated. In addition, the numerical results obtained from the FEM combined with the FLSD are confirmed with a series of bulge tests in view of bursting pressure and show a good agreement. Consequently, it is shown that the theoretical and numerical approach to bursting failure prediction proposed in this paper will provide a feasible method to satisfy the increasing practical demands for assessment of the forming severity in hydroforming processes.