Year-end Sale % OFF 
Abstract
The Japan Atomic Energy Agency (JAEA) has proposed rock-like oxide (ROX) fuel as a new, once-through type fuel concept. Here, burnup performance using ROX fuel was simulated in a pebble bed reactor with an accumulative fuel loading scheme. The MVP-BURN code was used to simulate the burnup calculation. Fuel of 5g-HM/pebble with 20% 235U enrichment was selected as the optimum composition. Discharged burnup could reach up to 218GWd/t, with a core lifetime of about 8.4years. However, high excess reactivity occurred in the initial condition. Initial fuel enrichment was therefore reduced from 20% to 4.65% to counter the initial excess reactivity. The operation period was reduced by the decrease of initial fuel enrichment, but the maximum discharged burnup was 198GWd/t. Burnup performance of ROX fuel in this reactor concept was compared with that of UO2 fuel obtained previously. Discharged burnup for ROX fuel in the PBR with an accumulative fuel loading scheme was as high as UO2 fuel. Maximum power density could be lowered by introducing ROX fuel compared to UO2 fuel. However, PBR core lifetime was shorter with ROX fuel than with UO2 fuel. A negative temperature coefficient was achieved for both UO2 and ROX fuels throughout the operation period.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
