Burner-heated dehydrogenation of a liquid organic hydrogen carrier (LOHC) system

Abstract

For a hydrogen-based economy, safe and efficient hydrogen storage is essential. Compared to other chemical hydrogen storage technologies, such as ammonia or methanol, liquid organic hydrogen carrier (LOHC) systems allow for a reversible storage of hydrogen while being easy to handle in a diesel-like manner. In our contribution, we describe for the first time the successful utilization of the exhaust gas enthalpy of a porous media burner to directly supply the dehydrogenation heat for a kW-scale dehydrogenation of the hydrogen-rich LOHC compound perhydro dibenzyltoluene (H18-DBT). Our setup demonstrates the dynamics of the dehydrogenation unit at a realized maximum hydrogen power of 3.9 kWth, based on the lower heating value of the released hydrogen. For the intended applications with fluctuating hydrogen demand, e.g. a hydrogen refueling station (HRS) or stationary heating in buildings, a dynamic hydrogen supply from LOHC is important. Methane, e.g. from a biogas plant, is utilized in our scenario as a fuel source for the burner. Hydrogen is released within 30 min after cold start of the system. The dehydrogenation unit exhibits a power density relative to the reactor volume of about 0.5 kWtherm l−1 based on the lower heating value of the hydrogen and a catalyst productivity of up to 0.65 gH2 gPt−1 min−1 for hydrogen release from H18-DBT. An analysis of the by-products and reaction intermediates shows low by-product formation (e.g. maximum 0.6 wt.-% for high boilers and 0.9 wt.- % for low boilers) and uniform distribution of intermediates after the reaction. Thus, a relatively homogeneous temperature distribution and a uniform LOHC flow in the reaction zone can be assumed. Our findings illustrate the dynamics (heating rates of about 10 K min−1) and performance of direct heating of a release unit with a burner and represent a significant step towards LOHC-based hydrogen provisioning systems at technically relevant scales.