Abstract
Deoxyribose nucleic acid (DNA) has recently proven to be an efficient flame retardant for ethylene vinyl acetate (EVA) copolymers, when added in bulk via melt-blending. Indeed, thanks to its char-former features, DNA was able to quite efficiently protect an EVA copolymer (containing 18wt.% of vinyl acetate) against an irradiative heat flux of 35kW/m2, strongly reducing the combustion kinetics and favouring a remarkable decrease of CO and CO2 yields. In the present work, the evolution of the DNA flame retardant concept is presented: in spite of bulk compounding, DNA has been confined as a coating on EVA surface. Thus, a comparative study on the flame retardant properties of EVA loaded or coated with DNA has been thoroughly carried out. The collected results have shown that the DNA coating blocks the ignition of the copolymer when tested by cone calorimeter under a heat flux of 35kW/m2, increasing the time to ignition by 228s (+380%, with respect to pure EVA), while it greatly postpones (102s, +625% with respect to pure EVA) and reduces the combustion kinetics under a heat flux of 50kW/m2. Finally, unlike melt-compounded DNA, the bio-macromolecule coating is able to protect the underlying material from a butane/propane torch applied three times consecutively to the specimen for 5s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
