Abstract
Bulk Metallic Glass (BMG) alloy with the composition of Zr55Cu30Al10Ni5 was deposited by sputtering as thin films on several different engineering polymers and polymer composites. Polycarbonate, polymethyl methacrylate, polyamide 12, polyarylamide (50GF=50 % glass fibers), polyphenylene sulfide (30GF) and polybutylene terephthalate (30GF) were used as substrates. The microstructure of the deposited BMG coatings was studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results of XRD and SEM studies were consistent with amorphous microstructure. Elemental compositions of the coatings were verified by energy dispersive spectroscopy (EDS). Mechanical properties of the coatings were compared to copper mould cast BMG using nano- indentation tests with similar results. According to the cross-cut tape tests good adhesion was achieved between the studied BMG alloy and all other polymer substrates except polycarbonate. Nano-indentation results showed similar mechanical properties for coating and cast BMG. The results of this study look promising as they open new opportunities for BMG- polymer composite applications.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
