Building energy consumption analysis and measures: a case study from an administration building in Chengdu, China

Abstract

Listen

Translate article

With the peak of carbon dioxide emissions and carbon neutrality, China is placing greater emphasis on energy expenditure. Office buildings occupy a prominent position in building energy consumption, which is one of the main energy consumption areas. Taking an administration building in Chengdu as an example, this article simulates the building energy consumption based on Design Builder software, examines the variables influencing energy consumption, and suggests energy-saving strategies combined with fresh ideas for sustainable architectural design. The results showed that the modeling building was a high-energy-consuming building, with an energy consumption of 724,857.59 kWh, and a unit area energy consumption of 288.17 kWh/m2 in Chengdu. For energy conservation and emission reduction, this article proposes the following three energy-saving measures. The first is to apply heat recovery technology for air conditioning systems. The second is photovoltaic glass, which provides partial electricity demand for buildings and reduces dependence on traditional energy sources. The third is roof greening, which utilizes the plants to purify the air and beautify the environment. The results showed that the heat recovery technology in air conditioning systems reduced the total energy consumption of buildings from 642144.04 kWh/m2 to 502937.83 kWh/m2, photovoltaic glass reduced 552243.87 kWh/m2, and roof greening reduced to 635947.35 kWh/m2. All of these have good energy-saving and emission reduction effects. The above three strategies not only help reduce building energy consumption, but also provide substantial support for China to achieve carbon neutrality.