Abstract
In this paper, lower and upper bounds of the buckling load of a composite beam with two non-overlapping delaminations are obtained by developing analytical models. The characteristic equation governing the delamination buckling is derived by using Euler–Bernoulli beam theory, performing proper linearization and by imposing the appropriate continuity and boundary conditions. The effects of the differential stretching and the bending–extension coupling are considered. The accuracy of the approach is verified by comparing results with previously published data and a separately carried out finite element analysis. The effects of the dimensions of the delaminations, their thicknesswise and spanwise locations on the lower and upper bounds of the buckling load are investigated in detail. The longer of the two non-overlapping delaminations dominates the buckling behavior. Composite beams with anti-symmetric non-overlapping delaminations withstand lower buckling loads than the composite beams with symmetric non-overlapping delaminations. The lower and upper bounds of the buckling load will be useful to gauge the working range of bridging and give guidelines for practical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have