Abstract

This paper is dedicated to the modeling, analysis, and numerical simulation of a two-phase non-Darcian flow through a porous medium with phase-coupling. Specifically, we introduce an extended Forchheimer–Darcy model where the interaction between phases is taken into consideration. From the modeling point of view, the extension consists of the addition to each phase equation of a term depending on the gradient of the pressure of the other phase, leading to a coupled system of differential equations. The obtained system is much more involved than the classical Darcy system since it involves the Forchheimer equation in addition to the Darcy one. This model is more appropriate when there is a substantial difference between the phases’ velocities, for instance in the case of gas/water phases, and applications in oil recovery using gas flooding. Based on the Buckley–Leverett theory, including capillary pressure, we derive an explicit expression of the phases’ velocities and fractional water flows in terms of the gradient of the capillary pressure, and the total constant velocity. Various scenarios are considered, and the respective numerical simulations are presented. In particular, comparisons with the classical models (without phase coupling) are provided in terms of breakthrough time among others. Eventually, we provide a post-processing method for the derivation of the solution of the new coupled system using the classical non-coupled system. This method is of interest for industry since it allows for including the phase coupling approach in existing numerical codes and software (designed for solving classical models) without major technical changes.

Highlights

  • Most applications involving fluid dynamics in laminar flow regime through porous media are described using Darcy’s equation

  • The modeling novelty here consists of taking into account the effect of one phase on the other by introducing a coupling of the Forchheimer equation and the Darcy one through pressure cross-terms in addition to the closure of the system through the capillary pressure and the saturation

  • This section is dedicated to the presentation of numerical simulations for comparison purposes

Read more

Summary

Introduction

Most applications involving fluid dynamics in laminar flow regime through porous media are described using Darcy’s equation. The modeling novelty here consists of taking into account the effect of one phase on the other by introducing a coupling of the Forchheimer equation and the Darcy one through pressure cross-terms in addition to the closure of the system through the capillary pressure and the saturation. The literature dedicated to the analysis of single-phase high flow rate is rich, and we refer, non-exhaustively, to Tek et al [6], Swift and Kiel [7], Lee et al [8], Skjetne et al [9], Yu-Shu Wu in [10], Guppy et al [11,12], Evans et al [13], and Evans and Evans [14]. The last section is dedicated to the presentation of our post-processing method and its theoretical and numerical validation

Physical Model
Mathematical Solutions
Well-Posedness Result
Explicit Solutions
Numerical Simulation
Numerical Scheme
Model Parameters
Numerical Results
Particular Coupling Cross-Terms
Different Coupling Cross-Terms’ Amplitudes
Variation of the Forchheimer Coefficient
Post-Processing
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call