Abstract
Ultraviolet nanoimprint lithography (UV-NIL) in pentafluoropropane (PFP) is recognized as one of the most promising methods to achieve ultrahigh-speed UV-NIL without air bubble defects. Although liquefied PFP dissolved in the resin reduces the resin viscosity and demolding force, it also causes large shrinkage of the pattern and degrades the pattern quality compared with that achieved in air or He environments. In this work, UV-NIL in trans-1,3,3,3-tetrafluoropropene (TFP), which has a higher vapor pressure than that of PFP, was investigated with respect to throughput and pattern quality characteristics to find an alternative to PFP. Bubble-free filling of UV-NIL was demonstrated in an TFP atmosphere: the cavity-filling time was about four times shorter than that in He, and the fine values of line edge roughnesses comparable to those achieved in air or He were obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
