Abstract
This article aims to investigate the influence of imposed flow rate oscillation on the bubble behaviors of evaporative flow of R-134a in horizontal narrow annular ducts. Particularly, the effects of amplitudes and periods of the oscillating flow rates along with the vapor quality of the R-134a on the bubble characteristics are examined in details. Moreover, the R-134a flow photos captured at the middle axial location are presented to illustrate the shift between the annular two-phase flow pattern and the bubble nucleation at different operating conditions and time instances. The observations reveal that the imposed mass flow rate oscillation results in the fluctuation of bubble departure diameter and frequency along with the density of active nucleation sites with the same frequencies. The larger amplitudes and longer periods of the mass flow rate oscillation lead to the stronger fluctuations in bubble dynamics. Furthermore, it is found that the bubble nucleation on the heating surface is the dominant mechanism at the low vapor quality of 0.05. However, the annular two-phase flow prevails over a relatively large portion of the periodic cycle at the dryness fraction of 0.5 and over the entire cycle at the dryness fraction of 0.95. Finally, the evaporative heat transfer of R-134a subject to the flow rate oscillation is correlated as a function of the mass flow rate and the vapor quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Communications in Heat and Mass Transfer
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
