Abstract
The individual phase holdups and mass transfer characteristics in three-phase fluidized beds with different floating bubble breakers have been determined in a 2.0 m high Plexiglas column of inner diameter 0.142 m. The bubble breaking phenomena by the breakers have been studied via a photographic method in a two-dimensional Plexiglas column. The volumetric mass transfer coefficient k L a in three-phase fluidized beds with hexagonal-shaped breakers is up to 40% greater than that in beds without floating bubble breakers. The bed porosity ε L + ε g, gas-phase holdup ε g, and volumetric mass transfer coefficient k L a increase with an increase in the volume ratio of floating bubble breakers to solid particles, V f/ V s, up to around 0.15, and thereafter decrease with V f/ V s in three-phase fluidized beds with floating bubble breakers. Also, k L a increases with increasing breaker density, projected area and contact angle between the floating bubble breakers and the water. The volumetric mass transfer coefficients in terms of the Sherwood number in three-phase fluidized beds with the various floating bubble breakers have been correlated with the volume ratio of floating bubble breakers to solid particles, the particle Reynolds number based on the local isotropic turbulence theory and the modified Weber number.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chemical Engineering & Processing: Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.