Abstract
At temperatures greater than 70 °C, the introduction of air in the slurry preparation process in slag hydration of solidified stone produces cracking and thermal stresses. In the study, slag cementing slurries at 90 °C were used to join brucite fibers. The mechanical performance, toughening mechanism, and microstructural changes were studied using tensile tests, XRD, TGA, SEM, IR, and triaxial tests. After curing for 14 and 28 days, the compressive and tensile strengths of 6 wt% brucite fiber-reinforced slag increased by 69.08 and 45.98% and 73.58 and 69.08%, respectively, while the elastic modulus decreased 8.4% compared to the control samples The brucite fibers were randomly distributed in the slag cementing slurries, resulting in a toughened material via energy dissipation caused by bridging peel and pulling-out. This result provides theoretical background to solve strength attenuation and cracking phenomenon at high temperature in solidified slag stones.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.