Broadening of the glass transition in blends of poly(aryl ether ketones) and a poly(ether imide) as studied by thermally stimulated currents

Abstract

AbstractBlends of poly(aryl ether ketones) (PAEKs) and an amorphous poly(ether imide) (PEI) were used as model systems to study the broadening of the glass transition due to crystallization and the resulting depletion of PAEK from the amorphous phase. Two different PAEKs were studied, which are completely miscible with PEI in the amorphous state; poly(aryl ether ether ketone) (PEEK) and a slower crystallizing poly(aryl ether ketone ketone)(PEKK). Relatively rapid crystallization conditions were chosen in order to trap a significant fraction of PEI between the PAEK crystal lamellae or between bundles of lamellae. The broad glass transitions are apparently a result of the nonuniform nature of this process. The breadth of the glass transition was quantified by thermally stimulated currents (TSC) applied in the thermal sampling (TS) mode. The results compared favorably with DSC data. The magnitude of the apparent activation energy obtained by the TS method allows one to assign the relaxations as cooperative (glass transition‐like) or non‐cooperative and to define the limits of the glass transition with a higher degree of precision than other techniques. Cooperative relaxations can be resolved with this technique, even if they are only a small fraction of the overall relaxing species at a given temperature. In some cases the glass transition region was found to broaden to ca. 60°C after crystallization. © 1993 John Wiley & Sons, Inc.