Abstract

This paper investigates the influences of nonperiodic rainbow resonators on the vibration attenuation of two-dimensional metamaterial plates. Rainbow metamaterial plates composed of thin host plates and nonperiodic stepped resonators are considered and compared with periodic metamaterial plates. The metamaterial plates are modelled with the finite element modelling method and verified by the plane wave expansion method. It was found that the rainbow metamaterial plates with spatially varying resonators possess broader vibration attenuation bands than the periodic metamaterial plate with the same host plates and total mass. The extension of attenuation bands was found not to be attributed to the extended bandgaps for the two-dimensional metamaterial plates, as is generally believed for a one-dimensional metamaterial beam. The complete local resonance bandgap of the metamaterial plates is separated to discrete bandgaps by the modes of nonperiodic resonators. Although the additional modes stop the formation of integrated bandgaps, the vibration of the plate is much smaller than that of resonators at these modal frequencies, the rainbow metamaterial plates could have a distinct vibration attenuation at these modal frequencies and achieve broader integrated attenuation bands as a result. The present paper could offer a new idea for the development of plate structures with broadband vibration attenuation by introducing non-periodicity.

Highlights

  • Published: 24 August 2021Metamaterials are artificial structures with extraordinary properties that cannot be found in naturally occurring materials

  • In order to exhibit the influences of the rainbow resonators and reveal the underlying mechanisms, the dynamic properties of periodic and rainbow metamaterial plates with the same host plates, springs and total resonator mass are calculated and compared

  • The vibration attenuation of 2D rainbow metamaterial plates with spatially varying stepped resonators was investigated in the present paper

Read more

Summary

Introduction

Metamaterials are artificial structures with extraordinary properties that cannot be found in naturally occurring materials. The existence of local resonance bandgaps enables the metamaterials to have a great potential for the vibration attenuation at low frequencies. Meng et al [55,56,57,58,59] investigated rainbow metamaterial beams with spatially varying oscillators and rainbow phononic crystal lattices with spatial varying mass blocks and found that the rainbow structures could generate broader bandgaps compared with periodic ones. Metamaterial plates with rainbow stepped resonators are first proposed in the present paper for the purpose of obtaining broader vibration attenuation bands. The present paper is structured as follow: Section 2 introduces the components of periodic and rainbow metamaterial plates and the finite element modelling (FEM) method.

FE Modelling of Metamaterial Plates
Validation of the FE Models
Results and Discussion
Periodic Metamaterial Plate
Rainbow Metamaterial Plate
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call