Abstract

Based on the Monte Carlo (MC) algorithm, we simulate the evolutions of different types of the polarized lights in the broad-band range from visible to infrared in foggy environments. Here, we have constructed two scattering systems to simulate the transmission characteristics of the polarized lights: (1) A monodisperse system based on five types of particles with the sizes of 0.5, 1.0, 2.5, 4, and 5 µm, respectively; (2) a polydisperse system based on scattering particles with a mean value (size) of 2.0 μm. Our simulation results show that linearly polarized light (LPL) and circularly polarized light (CPL) exhibit different advantages in different wavelengths and different scattering systems. The polarization maintenances (PM) of the degree of circular polarizations (DoCPs) are better than those of the degree of linear polarizations (DoLPs) for most incident wavelengths. CPL is not superior to LPL in the strong-absorption wavelengths of 3.0µm, 6.0µm, and long infrared. Here, when the wavelength is closer to the particle sizes in a system, the influence on propagating polarizations will be more obvious. However, the difference in the degree of polarization (DoP) between the resulting CPL and LPL is positive at these points, which means the penetrating ability of CPL is superior to that of LPL in these scattering systems. We have also simulated the extinction efficiency Qext and the scattering index ratio Qratio as functions of both wavelength and particle size for analyzing polarization’s transmission characteristics. Our work paves the way of selecting the optimal incident wavelengths and polarizations for concrete scattering systems.

Highlights

  • A foggy environment is often formed in low altitude

  • We tried to construct monodisperse systems based on five types of foggy particles with sizes of 0.5, 1.0, 2.5, 4, and 5 μm to simulate the transmission characteristics of linearly polarized light (LPL) and circularly polarized light (CPL)

  • We have investigated the transmission characteristics of different polarization states in different foggy environments from the visible to the infrared bands

Read more

Summary

Introduction

A foggy environment is often formed in low altitude. When travelling in a foggy environment, light will undergo scattering and absorption by the water droplets, during which light intensity information will be severely attenuated, affecting the long-distance transmission efficiency of optical information [1]. Amplitude, and phase, polarization is an independent dimension of light which has attracted more and more attention due to the polarization maintenance (PM) of light when it propagates in scattering systems. Jessica C. et al proposed three methods for simulating polarized light scattering processes based on the Monte Carlo (MC) algorithm [2,3]. Wang L.V. et al used a time-resolved MC technique to investigate the propagating effects of incident polarization states in turbid media under the wavelength of 543 nm [4].

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call