Abstract
We present the results of the development of a new broadband slot stripline leaky wave antenna intended for high-precision positioning by signals of global navigation satellite systems (GNSS) in the following bands: GLONASS L1/L2/L3, GPS L1/L2/L5, GALILEO E5a/E5b/E6/E1, COMPASS B1/B2/B3.
Highlights
Broadband receiving antennas of high-precision positioning by signals of Global Navigataion Satellite Systems (GNSS) are widely represented on the global market, for example [1,2,3]
This paper briefly describes a new antenna intended for high-precision positioning by GNSS signals in the bands: GLONASS L1/L2/L3, GPS L1/L2/L5, GALILEO E5a/E5b/E6/E1, COMPASS B1/B2/B3, as proposed in [4]
The simulated radiation pattern of the antenna at 1202 MHz is presented in Fig. 3, where (1) is the radiation pattern for the right-hand circular polarization, and (2) is the radiation pattern for the left-hand one
Summary
Broadband receiving antennas of high-precision positioning by signals of Global Navigataion Satellite Systems (GNSS) are widely represented on the global market, for example [1,2,3]. This paper briefly describes a new antenna intended for high-precision positioning by GNSS signals in the bands: GLONASS L1/L2/L3, GPS L1/L2/L5, GALILEO E5a/E5b/E6/E1, COMPASS B1/B2/B3, as proposed in [4]. Taking into account the offset of the antenna phase center (PCO) relative to its geometrical center and phase center variation (PCV) depending on the elevation angle ( ) and azimuthal angle ( ) of a received satellite signal is necessary in high-precision metrological GNSS applications using phase measurements. To fight the multipath effect main attention was paid to the characteristics of the antenna itself: radiation pattern, axial ratio, cross-polarization level and phase center stability
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have