Broadband Piezoelectric Energy Harvester Based on Coupling Resonance Frequency Tuning.

Abstract

The bandwidth of piezoelectric energy harvesters (PEHs) can be broadened by resonance-based frequency tuning approaches, including mechanical tuning and electrical tuning. In this work, a new coupling tuning mechanism for regulating the near-open-circuit resonance frequency by changing the effective electrode coverage (EEC) is presented. A linear model of a bimorph piezoelectric cantilever with segmented electrodes is used to evaluate the power harvesting behavior near the open-circuit resonance frequency when EEC changes from 0 to 100%. According to the theoretical analysis, it is found that the variation of EEC brings about the change in coupling strength, which is positively associated with the near-open-circuit resonance frequency of PEH. Two cantilever PEHs with segmented electrodes based on PZT and PZT-PT are constructed for validation of the coupling tuning mechanism. The analytical and experimental results illustrate remarkable improvements in both bandwidth and average power through the coupling resonance frequency tuning method. In addition, adopting extraordinary piezoelectric single crystals and optimizing the proof mass and piezoelectric layer dimensions were theoretically shown to be effective methods for further improvement of bandwidth.