Abstract
In recent years, for the realization of the low-cost and multi-band AP AA (Active Phased Array Antenna) system, broadband and highly accurate vector-sum phase shifter has attracted the attention. To realize such a vector-sum phase shifter, one of the difficulty arises from the trade-off between a bandwidth and an insertion loss of the PPF (Poly Phase Filter) which is deployed at the first stage inside the phase shifter and generates quadrature signals from a differential signal. In order to ease the trade-off of PPF, we propose the PPF using inductor and capacitor (LC-type) power splitter implemented in front of it. Simulation results with the proposed technique show the improvement of 2.7dB in the insertion loss, without degradation of the bandwidth. As a proof of concept, vector-sum phase shifter with the proposed PPF technique was fabricated using 0.18um SiGe BiCMOS process. Measurement results showed the 3dB gain bandwidth of 64% at X-band and the RMS phase error of less than 2.1°. This broadband and highly accurate results show that the proposed PPF technique is effective to realize multi-band AP AA system in the near future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.