Abstract
AbstractIn this article, broadband and high gain antennas are designed for bandwidth from 1.7 to 2.5 GHz which covers GSM 1800, 3G, 4G, and Wi‐Fi applications. The antennas are designed using 1 bottom and 2 top patches (1B2T) stacked microstrip antenna configuration and its array. The antenna structures consist of copper metallic plate as the bottom patch and low‐cost FR4 substrate for the top patches in air suspended mode. The antennas are enclosed in a metallic cavity which supports top substrate and increases gain and front‐to‐back ratio. The bandwidth for |S11| ≤ −10 dB and peak gain for this configuration are 41.5% and 11.9 dBi, respectively. A broadband 2 × 2 array of 1B2T configuration is designed using tapered feed network to provide impedance matching for broad bandwidth. The structures are designed, fabricated, and tested. A bandwidth of 44% and peak gain of 16.6 dBi has been achieved using 2 × 2 array. The simulated and measured results are in good agreement. The proposed antennas are good candidates for wireless communication systems.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
