Bridge Weigh-in-Motion Algorithms Based on the Field Calibrated Simulation Model

Abstract

AbstractMost of the commercially available bridge weigh-in-motion (B-WIM) systems are based on an algorithm developed by Moses. The performance of this method was generally acceptable for estimating gross vehicle weight (GVW) but can be inadequate for estimating single axle load. Two alternative algorithms for the identification of vehicle axle loads are presented in this paper based on field verified simulation model using the semirigid frame system with multiple simplified span bridges. Both algorithms are based on the simulation of the entire bridge, representing realistic boundary conditions, bridge geometry properties, and field environment from field B-WIM testing results. The first alternative algorithm includes adjusting the experimental weight-in-motion (WIM) moment of the testing span from the simulation model to perform vehicle weight calculation. The second algorithm includes applying the simulated influence line from the simulation model to calculate the vehicle weight. Both approaches demons...